Home
> Services >
Asia Approvals > Sinagpore
PRODUCT SAFETY
With effect from 1st April
2002, the Singapore Productivity and Standard Board
(PSB) is known as the Standards, Productivity and Innovation
Board or SPRING Singapore for short. SPRING stands for
Standards, Productivity and Innovation for Growth.
At the same time, the Singapore Consumer Protection
(Safety Requirements) Registration Scheme (CPS Scheme)
is changed from one based on government certification
to one based on third-party Conformity Assessment Bodies
(CAB) certification. PSB is the Designating Authority
of CABs under the Singapore Productivity and Standards
Board (Conformity Assessment) Regulations 2002. The
Consumer Protection (Safety Requirements) Regulation
2002 is applicable for testing of products.
Currently there are total of 45 controlled goods for
CPS Certification.
Safety mark has to be placed on the product.
License holder has to be the local representative.
The following documents are required for CPS Certification.
• CB Certificate
with Test Report not older than 3 years
• Dtailed information of local representative
• Crcuit diagram with the rating values, ideally
A3 size together with the Bill of Material (BOM).
• English user manual
• Rting label in original or clear photo in
colour.
• Photo documentation in colour showing exterior
and interior
Contact SIEMIC for our
5-working days Singapore CPS Certification Services.
RADIO AND TELECOM
APPROVALS
Under the Telecommunication (Dealers)
Regulations, no dealer shall sell (a) any type of telecommunication
terminal equipment or (b) any type of radio-communication
equipment to be used in Singapore, unless the type of
equipment has been approved by the Authority to be sold.
Exempted from approval are those telecommunication equipment
authorized under the Equipment Registration Scheme or
other equipment set out in the First Schedule of the
Regulations (see other requirements under the General
Approval Scheme).
Three schemes are implemented by the Info-Communications
Development Authority of Singapore (IDA) for the approval
of telecommunication equipment for sale:
a) General Approval (GAP) Scheme
(contact SIEMIC for the complete product list);
b) Equipment Registration (ER) Scheme
(contact SIEMIC for the complete product list)
c) Type Approval (TA) Scheme
(contact SIEMIC for the complete product list) listed
in Annex 1A
Except for the category of Single-Line Equipment
which comes under the GAP Scheme, all telecommunication
(line and radicommunication) equipment must be type
approved by or registered with IDA before it can be
sold for connection to the public telecommunication
network or for use in radiocommunication.
The list of Technical Regulations is updated from
time to time. Contact SIEMIC for the he current list
of Technical Regulations (Type Approval Specifications)
for Line Terminal Equipment, Radio-communication Equipment
and EMC.
SIEMIC provides turn-key solution certification
services to obtain Singapore radio and telecom approvals.
For more information on certification procedures,
please contact SIEMIC
Certification Services.
To get an Estimate from SIEMIC, download SIEMIC
International Approvals Questionnaires Form, complete
the form with a list of products.
|
